Polyaspartic Floor Coating in Myerstown, PA | Garage, Basement & Patio | FlakePro Coatings
Lebanon County, PA
Polyaspartic Floor Coating in Myerstown, PA
Garage, basement, patio and pool deck coatings installed in one day. We are based in Stevens, PA, just 12 miles from Myerstown, and we serve all of Lebanon County with honest pricing and a 15-year warranty against peeling.
Myerstown has a lot of older homes with bare concrete floors that have been taking salt, oil, and moisture for decades. Once a concrete floor starts dusting, staining, or cracking, it only gets worse each winter. A properly installed polyaspartic floor coating stops that cycle completely and gives you a floor that looks clean, stays clean, and holds up for 15 to 20 years.
At FlakePro Coatings, we are a family-owned company out of Stevens, PA. We are not a franchise. When you call us, you are talking to the people who will actually show up at your door. We serve Myerstown and all of Lebanon County, and we stand behind every project with a 15-year warranty.
Our Services in Myerstown, PA
Whether it is a garage that takes road salt every winter, a basement that always feels damp, or a patio that needs to hold up through Pennsylvania summers, we have a coating system for it. Here is what we install in Myerstown and surrounding Lebanon County:
Cool to the touch, non-slip, and chlorine-resistant. Safe for bare feet all summer long.
Not sure which service is right for your space? Browse our color and design options or look at completed projects from homeowners across Lebanon and Lancaster counties.
Why Polyaspartic, Not Standard Epoxy, in Myerstown
A lot of homeowners in Myerstown search for “epoxy floor coating” because that is the most familiar term. But most of what gets installed as “epoxy” in residential garages is a product that was designed for stable indoor conditions, not for a Lebanon County garage that hits minus 5 degrees in January and 95 degrees in August.
Polyaspartic is different. It was originally developed for industrial and military use, then refined for residential and commercial floors. The key reason it works in our climate: it flexes with the concrete as temperatures change instead of cracking under the stress.
A floor coating is only as good as what happens before the product goes down. This is where most failures come from, not from the coating itself, but from cutting corners on preparation. Here is exactly what we do on installation day at your Myerstown home:
1
Diamond Grinding
We profile the concrete with industrial diamond grinders. This removes the weak surface layer and opens the pores so the coating bonds to the actual slab, not just the top crust. Acid etching does not do this, which is why acid-etched floors peel.
2
Crack and Pit Repair
Every crack, chip, and low spot is filled and leveled before anything goes down. A coating applied over unrepaired concrete will eventually show every flaw underneath it.
3
Polyaspartic Base Coat
The base coat seals the concrete and creates the chemical bond the rest of the system builds on. This layer is what keeps moisture from working its way back up through the slab.
4
Decorative Flake Broadcast
Flakes go down at 100 percent coverage, giving the floor its color, texture, and slip resistance. You pick the blend from our 30 plus design options.
5
UV-Stable Polyaspartic Topcoat
The clear final coat locks everything in and gives the floor its chemical resistance and durability. It cures hard within hours. You can walk on it the same evening and drive on it the next day.
Pricing depends on the size of the space and the condition of the concrete. As a local company without franchise overhead, we offer competitive pricing for Myerstown and Lebanon County homeowners. Here are typical ranges for common project sizes:
Space
Typical Size
Estimated Range
1-Car Garage
around 250 sq ft
$1,200 to $1,800
2-Car Garage
around 480 sq ft
$2,100 to $3,200
3-Car Garage
around 700 sq ft
$3,000 to $4,500
Basement Floor
400 to 800 sq ft
$1,800 to $4,000
Patio or Driveway
200 to 600 sq ft
$1,400 to $3,500
These are typical ranges for Lebanon County projects. Your actual quote depends on the concrete condition, size, and any repairs needed. We always give you a firm written price before we start, so there are no surprises.
“We had them coat our garage in the spring and it was the best home improvement we did all year. One day, no mess left behind, and the floor has been perfect through two winters now. My neighbor across the street asked for their number within a week.”
R. Stoltzfus, Lebanon County, PA
★★★★★
“Our basement had been bare concrete since we moved in 12 years ago. Always dusty, always looked unfinished. The FlakePro team came in, did the whole floor in one day, and it looks like a completely different house down there. Very professional.”
M. and D. Hess, Lebanon County, PA
★★★★★
“They ground the floor, filled the cracks, and finished the whole garage before dinner. The crew was on time, cleaned up after themselves, and the price was exactly what they quoted. That is all I ask for. Highly recommend.”
T. Kauffman, Lebanon County, PA
Towns We Serve Near Myerstown
We are based in Stevens, PA and cover all of Lebanon County and northern Lancaster County. Here are the communities closest to Myerstown where we regularly work:
Not sure if we serve your area? Call us at 717-419-5885 and we will tell you right away.
Common Questions from Myerstown Homeowners
Do you actually come out to Myerstown, or do I have to drive somewhere?
We come to you. Our shop is in Stevens, PA, about 12 miles from Myerstown. We do free on-site estimates and handle the entire installation at your home. No showroom visit required.
How long does it take? Can I be home during the installation?
Most garages and basements are done in a single day. You are welcome to be home. Our polyaspartic system has low odor compared to traditional epoxy products, so you do not need to leave the house. We just ask that people and pets stay off the coated area while it cures.
My garage floor has a lot of cracks. Is that a problem?
Not at all. Crack repair is part of every installation we do. We fill and level the cracks before any coating goes down. If the cracks are structural (meaning the slab is heaving or settling significantly), we will tell you that honestly before we start. Minor to moderate cracking is routine and not a reason to skip coating the floor.
Can you coat a floor in cold weather? We have Lebanon County winters.
Yes. Polyaspartic can be applied at temperatures well below freezing, unlike traditional epoxy which requires warm conditions. We install year round. If you want your floor done in October before winter hits, or in February when business slows down, we can do it. Read more: Benefits of Polyaspartic Coatings.
What happens if the floor peels? Is there a warranty?
Every FlakePro installation comes with a 15-year warranty against peeling, chipping, and delamination. If the floor fails under normal use within that period, we come back and fix it at no charge. Full details are on our warranty page.
Why does my old coating keep peeling every few years?
The most common reason is the surface was never properly prepared. Acid etching cleans the floor but does not profile the concrete the way diamond grinding does. Without that profile, the coating bonds to the weak surface layer instead of the solid slab, and it lifts off within one or two winters. We explain all five causes in detail here: Why Is My Garage Floor Peeling?
A polyaspartic floor coating is an advanced, two-part protective system originally developed for industrial and military use — later refined for residential and commercial concrete floors. It’s a liquid material that chemically bonds with the surface of the concrete, creating a dense, seamless, and flexible protective layer. Once cured, it forms a surface that’s waterproof, chemical-resistant, UV-stable, and extremely durable, yet still visually elegant. Unlike traditional sealers or paints that simply sit on top of the surface, polyaspartic coatings penetrate deep into the concrete pores, locking out moisture and extending the life of your floor by decades. They’re ideal for garages, patios, basements, pool decks, and driveways — anywhere you need long-term performance and low maintenance.
How does the installation process work?
Every project begins with professional concrete preparation. We start by mechanically grinding the surface to remove imperfections and open up pores for maximum adhesion. Next, any cracks or pits are filled and leveled to create a perfectly smooth base. Then we apply a primer and base coat, followed by a full broadcast of decorative flakes — these provide texture, slip resistance, and unique color combinations. Finally, we seal everything with a clear polyaspartic topcoat that hardens within hours. The entire process typically takes one day, allowing you to walk on your new floor the same evening and drive on it within 24 hours.
What makes polyaspartic coatings last so long?
Polyaspartic coatings form a dense cross-linked molecular structure that makes them resistant to abrasion, water, chemicals, and UV light. This advanced chemistry prevents fading, yellowing, and cracking, even in high-traffic or outdoor environments. In addition, polyaspartic coatings expand and contract naturally with concrete as temperatures change — preventing peeling or delamination over time. With minimal maintenance and proper installation, you can expect 15–20 years or more of flawless performance.
Are polyaspartic floors safe for indoor and outdoor spaces?
Yes — completely safe. Our coatings are low-VOC and low-odor, meaning they don’t emit harmful fumes during or after installation. They’re ideal for basements, laundry rooms, home gyms, and other enclosed areas, as well as outdoor patios, porches, and driveways exposed to sun and weather. Because the surface is fully sealed and non-porous, it resists moisture and prevents mold or mildew from forming — making it an excellent choice for families, pets, and allergy-sensitive homeowners.
What design options are available?
Flake Pro Coatings offers dozens of designer flake blends, from natural stone tones to modern grays and custom color combinations. You can choose between matte, satin, or high-gloss finishes, depending on your aesthetic and functional needs. We also provide custom blends to match your home’s exterior or interior style. The surface can be smooth for an elegant finish or lightly textured for extra slip resistance — perfect for outdoor or poolside applications.
Newsletter subscribe!
How do I get started?
Simply request your free estimate. Our team will inspect your concrete, explain all color and finish options, and provide a clear, upfront quote.